Key Takeaways
•A normal customs duty, import VAT, anti-dumping duty and safeguard measure are different charges. They must not be combined under the vague label “tariff.”
•Brazil opened an anti-dumping investigation on June 22, 2026 concerning certain table glassware from China and Egypt under NCM 7013.28.00, 7013.37.00 and 7013.49.00. As of the latest official case page, this remains an investigation, not a published definitive duty.
•India’s DGTR issued final findings on September 24, 2026 for Chinese borosilicate table and kitchen glassware. It recommended US$703 per metric tonne for Anhui Deli Industrial Glass Co., Ltd. and US$1,526 per metric tonne for other covered producers and exporters. The recommendation becomes effective only through a Central Government notification.
•India’s proposed measure does not cover every borosilicate product. Jars, carafes, tea or coffee kettles, water or juice jugs, water bottles, round and square storage jars, and oil dispensers are expressly excluded in the DGTR duty table.
•The WTO’s China tariff profile reports a 2025 simple-average MFN applied tariff of 7.5% across all products and 6.5% for non-agricultural products. That is not a universal 7% duty for every glassware SKU.
•Third-country assembly is lawful only when it creates genuine manufacturing and satisfies the importing market’s origin rules. Routing Chinese goods through a third country, changing documents or performing minor operations to avoid duty can trigger anti-circumvention action.
•Importers should classify the exact product, screen trade remedies, document origin and model the landed cost before signing a quotation. A low FOB price can become an expensive shipment after trade measures are applied.
Why are glassware import costs harder to predict in 2026?
Glassware import cost is no longer determined by the supplier’s unit price and one standard customs percentage. A buyer may face a normal third-country duty, import VAT or GST, customs fees, port charges, an anti-dumping duty, a safeguard measure or a product-specific regulatory cost.
The calculation should be separated into four lines:
Landed cost = customs value + ordinary customs duty + trade-remedy duty + import taxes and clearance costs
A 13% import VAT may apply in a particular destination, but it is a market-specific tax assumption, not a universal glassware rate.
The broader cost and risk framework is covered in The Glassware Supply Chain Resilience Playbook: A Strategic Framework for Managing Cost, Risk, and Compliance in 2026. Trade-remedy screening should be one input in the sourcing decision, alongside breakage, lead time, compliance and supplier concentration.
What is the latest status of Brazil’s glassware anti-dumping investigation?
Brazil’s Ministry of Development, Industry, Foreign Trade and Services states that an anti-dumping investigation began on June 22, 2026 concerning table glassware from China and Egypt. The official case page lists NCM 7013.28.00, 7013.37.00 and 7013.49.00 and identifies the investigation as anti-dumping.
This is an important distinction for importers. The opening of an investigation does not automatically mean that a definitive anti-dumping duty is already payable. The case page lists the initiation circular and questionnaire deadlines, but it does not show a final measure imposing a duty on the covered products.
Do not assume that every glass product is included. The product scope may distinguish soda-lime tableware from food-packaging glass, borosilicate items, lead crystal, decorative products or products with removable accessories. A customs broker or Brazilian trade-remedy adviser should confirm the exact scope before a shipment is committed.
What did India decide about Chinese borosilicate glassware?
India’s Directorate General of Trade Remedies issued final findings dated September 24, 2026 in Case File 6/31/2025-DGTR. The finding concluded that the covered Chinese borosilicate table and kitchen glassware was dumped and materially retarded the establishment of the Indian domestic industry.
The DGTR recommended a five-year anti-dumping duty under the lesser-duty rule. The recommended amounts are:
Covered exporter or producer | Recommended duty | Unit |
Anhui Deli Industrial Glass Co., Ltd. | US$703 | per metric tonne |
Any other producer or exporter from China | US$1,526 | per metric tonne |
Other-country producer exported from China | US$1,526 | per metric tonne |
These are recommendations in the DGTR final findings, not a substitute for the Central Government’s notification. The duty table states that the measure would apply from the date of the notification issued by the Central Government.
The Indian case also shows why HS classification alone is not enough. The listed headings include 7013 2800, 7013 3700, 7013 4200, 7013 4900 and 7013 9900, but the DGTR says the customs classification is indicative and that the product description controls the scope.
The following product types are expressly excluded from the product under consideration: jars, carafes, tea or coffee kettles, water or juice jugs, water bottles, round storage jars, square storage jars and oil dispensers.
For a Chinese supplier, this creates a product-specific screening question. A borosilicate glass pitcher may be treated differently from a borosilicate food container. A storage jar may fall outside the defined product even when it shares the same glass family. Importers should keep drawings, product photographs, capacity, use, closure type and technical descriptions ready for customs review.
For buyers sourcing wholesale glass jars, the exclusion for jars may be commercially significant, but it should not be assumed to cover a differently described or multifunctional product. For glass food containers, the importer should compare the actual use and product description with the Indian scope. For glass bottles, capacity, closure and intended use may affect classification and trade-remedy analysis.
![]()
Is a 7% MFN tariff and 13% VAT a reliable glassware calculation?
No. Those figures may be useful as a starting hypothesis in a specific market, but they are not a universal glassware rate. The WTO’s China tariff profile reports a 2025 simple-average MFN applied tariff of 7.5% for all products and 6.5% for non-agricultural products. An average across tariff lines cannot establish the duty for one glassware subheading.
A procurement team should use the following rate comparison method:
Cost or measure | What it means | How to verify it |
MFN or third-country duty | Ordinary customs duty for the exact classification and origin | National tariff schedule or official tariff database |
Preferential duty | Reduced rate under a trade agreement, if the product and origin qualify | Agreement rules and valid origin evidence |
Anti-dumping duty | Additional trade-remedy charge on specified goods and origins | Official measure, exporter and product scope |
Import VAT or GST | Domestic consumption tax collected at import | Destination tax rules; normally outside EU TARIC |
Safeguard or quota | Temporary measure or quantity restriction | Customs and trade-remedy notices |
Customs and port charges | Clearance, inspection, terminal and handling costs | Broker, port and carrier quotation |
The EU’s TARIC database integrates the Common Customs Tariff, trade-defence instruments, tariff preferences, prohibitions and other measures, and it is updated daily for national customs administrations. TARIC does not contain national VAT rates, so an EU importer must check customs duty and VAT separately.
The same discipline applies elsewhere. Start with the complete tariff line, not only HS 7013. Confirm whether the product is tableware, food packaging, a bottle, a household container, a decorative article or another category. Then enter the origin and check whether a trade-remedy measure or additional code applies.
What does legal third-country assembly actually change?
Third-country assembly can change origin only when the operation satisfies the importing country’s applicable non-preferential or preferential origin rules. The key concept is usually substantial transformation, assessed through a tariff change, value-added rule, specified manufacturing process or a combination of criteria.
The WTO explains that non-preferential rules of origin are relevant to MFN treatment, anti-dumping, countervailing duties, safeguards and origin marking. It also recognises that misuse of origin rules has been connected with claims that third-country facilities were used to circumvent anti-dumping duties.
A genuine supply-chain relocation may involve melting or forming glass, installing a new mould, producing a new product, applying controlled decoration, assembling a functional set and carrying out documented quality control in the third country. Whether that is enough depends on the importing country’s law and the product-specific rule.
A compliant third-country model requires investment, bills of materials, production records, labour and machine records, supplier invoices, yield data, inventory movement, certificates and a defensible origin analysis. The importer should obtain an advance customs ruling or written professional opinion where the value is material.
Never describe third-country processing as “origin change” before the destination customs authority confirms it. If the operation does not confer origin, the goods may remain Chinese-origin and remain subject to the original trade measure. If the route is designed to evade a duty, the importer may face back duties, penalties, detention, seizure or an anti-circumvention investigation.
![]()
How should a glassware importer manage anti-dumping exposure?
The best control is a product-level trade-remedy register. Create one record for each SKU and include the product description, glass type, intended use, capacity, dimensions, closure, decoration, HS or national tariff code, country of manufacture, country of export and destination market.
Add five decision gates before the purchase order:
1.Classification gate: Confirm the code with the importer’s customs broker or obtain a binding or advance ruling where available.
2.Scope gate: Search current and recently initiated anti-dumping, countervailing and safeguard cases for the product and origin.
3.Origin gate: Document where the glass is melted, formed, decorated, assembled and packed.
4.Cost gate: Model ordinary duty, possible trade-remedy duty, VAT or GST, brokerage and currency movement separately.
5.Contract gate: State who bears additional duty caused by incorrect classification, origin documentation or an unapproved production change.
For glass beverage dispensers, the glass body, tap, stand and retail configuration may need separate classification review. A product that looks similar in a catalogue may not fall within the same customs description as a table tumbler.
Do not wait until the goods are on the water. The correct time to review trade barriers is when the RFQ is issued, when the sample description is approved and again before the commercial invoice is finalised.
How can suppliers and importers share the tariff risk?
A strong purchase contract does not promise that tariffs will never change. It defines what happens when a government opens an investigation, imposes a duty or rejects an origin claim.
The contract should require the supplier to disclose investigations, customs inquiries, production-site changes, third-country processing and changes to HS or origin statements. It should identify the party responsible for obtaining origin documents and the evidence required before the supplier states that goods qualify for a lower rate.
Use a price-adjustment formula rather than an open-ended clause. For example, the parties can define which official duty change qualifies, whether the adjustment applies only to affected SKUs, what evidence is required and whether the buyer may cancel or shift volume if the landed cost exceeds a defined threshold.
A second supplier in another country may reduce concentration risk, but it is not automatically a tariff solution. The alternative source must be checked for capacity, product equivalence, mould ownership, food-contact documentation, packaging performance, origin qualification and its own trade-remedy exposure.
The practical objective is not to chase the lowest headline duty. It is to build a supply chain that remains legally defensible and commercially workable when a trade measure changes.
KINGSTAR GLASSWARE works with importers and wholesalers sourcing jars, bottles, food containers, beverage dispensers and other glass products. Buyers should evaluate the exact product, origin evidence, compliance file and landed-cost assumptions before treating a quotation as final.
References
[1] Brazil MDIC Table Glassware Anti-Dumping Investigation
[2] India DGTR Final Findings on Borosilicate Table and Kitchen Glassware
[4] European Commission TARIC Database
[5] WTO Rules of Origin Information
Frequently Asked Questions
Does Brazil already charge a definitive anti-dumping duty on the glassware covered by the 2026 investigation?
The official Brazilian case page confirms that the investigation began on June 22, 2026 for specified NCM codes and Chinese and Egyptian origins. It does not, on the latest case information reviewed, show a definitive anti-dumping duty order. Importers should continue monitoring the official case and model a potential-duty scenario before placing large orders.
Are all Chinese borosilicate glass products subject to India’s proposed anti-dumping duty?
No. India’s DGTR final findings define the covered product and expressly exclude jars, carafes, tea or coffee kettles, water or juice jugs, water bottles, round and square storage jars, and oil dispensers. The product description controls, so importers should retain technical evidence and obtain a classification review for each SKU.
Can third-country assembly legally avoid a glassware anti-dumping duty?
Only if the processing genuinely confers origin under the importing market’s rules and is supported by complete production records. Repacking, relabelling, sorting or minor assembly normally creates a serious circumvention risk. A buyer should obtain an origin ruling or specialist opinion before committing to a third-country manufacturing plan.
Related Articles
Navigating tariffs, anti-dumping duties, and other trade barriers on glassware imports in 2026? Here are three practical pieces from our blog that help importers manage cost and regulatory risk:
Calculate Landed Cost of Imported Glassware
A clear framework for factoring duties, tariffs, and additional trade costs into your true unit price.China Export Tax Rebate Glassware
How recent Chinese export tax changes interact with destination-market duties and affect overall landed cost.Guide to Importing Glassware from China
Practical steps for understanding customs classification, duty rates, and documentation requirements before shipment.